








Walnut Wood Slat Wall Sconce | Warm White & Dimmable | Qonforta
Description
Elevate your walls with warm, sculpted light. The Qonforta Walnut Wood Slat Wall Sconce combines rich walnut wood and frosted acrylic into a statement piece that fits modern, Japandi, and mid-century interiors. Its integrated LED delivers 50,000 hours of warm 3000K glow—hardwired for a clean, cord-free look. Choose steady Warm White or the Triac Warm Dimming variant for full ambiance control. Available in Walnut and Wood Color finishes. Free shipping across the USA. Order today and transform any room instantly.
| Specification | Details |
|---|---|
| Type | Wall Sconce / Wall Lamp |
| Material | Walnut Wood, Acrylic |
| Finish / Color | Walnut, Wood Color |
| Dimensions | L 5.9 in × W 3.1 in × H 15.7 in / L 15 cm × W 8 cm × H 40 cm |
| Bulb Base | Integrated LED (Non-Replaceable) |
| Light Source Lifespan | 50,000 hrs |
| Wattage | Approx. 12W |
| Color Temperature | 3000K Warm White |
| Voltage | 110–120V |
| Bulb Included | Yes (Integrated) |
| Dimmable | Yes (Triac Warm Dimming variant) |
| Power Source | Hardwired |
| Recommended Rooms | Bedroom, Living Room, Hallway, Dining Room |
| Indoor / Outdoor | Indoor |
| Assembly Required | Yes |
Shipping & Delivery
- Handling Time: 1 to 2 business days (Monday through Friday).
- Transit Time: 6 to 12 business days (Monday through Friday).
- Most Orders Arrive: Within 7 to 14 business days.
- Free Shipping: Free shipping on all United States orders.
For more detailed information see our Shipping Policy.
Returns & Refunds
- Return Window: 30 Days From The Delivery Date
- Restocking Fee: None
- Refund Timeline: Processed Within 7 Business Days After We Receive Your Return
For more detailed information see our Return and Refund Policy.
Questions about this piece
Measurements, materials and use notes for this product are listed on this page. If something is still unclear, email info@qonforta.com and a real person answers within 1 to 2 business days.

In the room
What it does on the wall
The glow runs up the wall, not into your eyes
The frosted panel sits behind the slats, so you never look straight at the LED. The 3000K light leaves the top and the bottom of the housing and spreads over the wall in two soft cones. Beside a bed or along a hallway that is enough to move around by, without the hard edge of a ceiling light.
Steady warm white, or turn it down
Warm White holds one brightness and runs off a normal wall switch. Triac Warm Dimming lets you take it down low, but it needs a TRIAC wall dimmer on that circuit, so check what sits behind your switch plate before you choose it. Both versions are the same price, so pick the dimming one if you already have a dimmer or plan to fit one.
Wood slats over a frosted panel
The face is a run of wood slats with the diffuser behind them, in two finishes, Walnut and Wood. In daylight it reads as a wooden object on the wall, at night as a strip of light. At 15.7 inches tall and 3.1 inches deep it fills a bare stretch of wall without catching your shoulder in a hallway.
Specifications
The details, in full
- Material
- Walnut wood with a frosted acrylic diffuser
- Finishes
- Walnut, Wood
- Size
- 15.7" high x 5.9" wide x 3.1" deep / 40 x 15 x 8 cm
- Light source
- Integrated LED, not replaceable, rated 50,000 hours
- Wattage
- Approximately 12W
- Color temperature
- 3000K warm white
- Light modes
- Warm White, or Triac Warm Dimming on a compatible wall dimmer
- Power
- 110 to 120V, hardwired to a wall box, no plug or cord
- Where it goes
- Dry indoor rooms: bedroom, living room, hallway, dining room
- Assembly
- Mounting plate and hardware included, wiring and mounting required
Size guide
One size, drawn to scale
| Measurement | Inches | Centimeters |
|---|---|---|
| Height | 15.7 in | 40 cm |
| Width | 5.9 in | 15 cm |
| Depth from the wall | 3.1 in | 8 cm |
Ready to order
Pick your size and finish
Free shipping within the United States and 30 days to send it back.
$285.00
$404.99
Installation
What the install looks like
-
01
Cut the power at the breaker
Not just the wall switch. Check the wires with a voltage tester before you open anything up.
-
02
Fit the mounting plate
Screw the plate to the wall box with the hardware supplied. If there is no box at that spot, the wiring has to be brought there first.
-
03
Connect the wires
Live to live, neutral to neutral, ground to ground on 110 to 120V, then push the connections back into the box.
-
04
Hang the sconce and level it
Slide the body onto the plate and tighten the screws. Check that it sits straight before you let go of it.
-
05
Restore power and test
Switch the breaker back on. On the Triac version, run it at full and at low on your dimmer to check for flicker.
Before you order
Questions people ask about this piece
Still unclear about something? Email info@qonforta.com and a real person answers within 1 to 2 business days.
Is it hardwired, or does it plug in?
Can I dim it?
Can I change the bulb?
How high should I mount it?
Is it bright enough to light a whole room?
Can it go in a bathroom or outside?
How do I clean and care for it?
Every Piece Has A Place It Came From.
Some things are simply made better in one place than in another. So we buy our ceramics, textiles, lighting and furniture accents from makers around the world, and we choose every piece ourselves. Before anything is sent to you, we check it. And if it does not fit your home, you have thirty days to return it.
Help center
Frequently Asked Questions
Everything about shipping, returns and our pieces. Can't find your answer? We reply within 1 to 2 business days.
Still have a question?
Email info@qonforta.com and a real person gets back to you within 1 to 2 business days.
Contact us











